Searching for the right dual flush residential toilet to suit your needs can be a challenging without some guidance. Not all products are created with the same purpose or audience in mind, so it’s crucial to know what you’re searching for.
We’ve tested over 100 products, and below are our recommendations for the best dual flush residential toilet for different purposes.
Find the Perfect Dual Flush Residential Toilet with Our Top 10 Reviews
We have curated an extensive list of the top dual flush residential toilet. Our team reviewed thousands of resources before putting any suggestions for the best dual flush residential toilet in this article. So, check out the list below that’s found after long hours of research.
Danco Hyr460 Hydroright Hyrdroright Universal Water-Saving
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
- COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS.
- FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
- DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Danco Hyr451T Hyrdroright Universal Water-Saving Toilet
- WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
- ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
- HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required. This has an adjustable height of 11-13.8 inches.
- TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
- DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
- IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
- DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.
Deervalley Dv-1F026 Ally Dual Flush Elongated
- ✅【MODERN DESIGN】: Modern standard one piece toilet,sleek ADA height design—stylish, nice, great, terrific lines perfectly suitable for your modern design bathroom.
- ✅【EASY TO CLEAN】: Toilet glazed surface is self-cleaning, simplifying maintenance. It is very easy to reach for cleaning .Elongated one-piece toilet skirted design, easier to maintain versus a two-piece toilet.
- ✅【Siphon Flushing】: Highly efficient one piece toilet allows you to proactively conserve water by selecting 0.8 GPF or higher(1.28gpf) for tougher jobs (water savings of up to 16,500 gallons per year ).Dual flush toilet fully glazed flush,Super-quiet and powerful flush with no clogs. Leak-proof.
- ✅【Easy Install】: The dual flush toilet is easily installed,it can more Convenient.Two Sizes of Supply Line Inlet Hose,this toilet will come with a supply line connector(adapter) for you to connect the supply line and toilet. If your supply line size is 7/8″, you could directly connect your water line to the toilet. If your supply line size is 1/2″, please screw off the adapter, then connect it.
- ✅【Warranty】: DeerValley toilets are warranted to be free of defects for one year from the date. One-year Limited warranty on flushing mechanism and Soft-Closing toilet seat lid. Lifetime after-sale service, 24 hours online.
Swiss Madison Sm-1T256 Carré One Piece
- Dual flush with high-performance gravity 1.1 / 1. 6 gallon per flush (gpf)
- Seamless porcelain one-piece with an easy-to-clean design
- Square bowl offers added room and comfort.
- Soft Closing Seat closes gently and quietly
- Quick-Release seat can be unlatched from the toilet for easy removal and convenient cleaning; no tools required
- ADA compliant for residential installations.
R&T A2422M 3″ Dual Flush Valve
- 【Enhance Your Toilet’s Performance】Fix a leaking toilet with 3″ (80 mm) drain outlet and turn into a powerful flushing. Using together with R&T fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Please note: fill valve, gasket and bolts kit are sold separately.
- 【Water-Saving】The 3 in. (80 mm) dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill. Lighter pushing force, more convenient for elder and children.
- 【Easy Installation & Adjustment】Easy installation without tools. Adjustable overflow tube to fit different tank heights(11.22″-15.15″), half and full water level adjusters to control water consumption.
- 【Modern Top Mount Dual Push Button】Endurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid.
- 【Warranty】Direct supply from global leading manufacturer,backed by 5 Years Warranty.
Toilet Flush Valves 2-Inch Replacement Valve
- 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet.
- 2.MEASURE TWO SIZE: This item is only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be used if it exceed this size.Measure the Tank Height: Height Should be 10″- 11.8″ (25.4 cm-30 cm). Please measure the size including ceramic cover for water tank, otherwise , it won’t fit.
- 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
- 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again.
- 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve.
Swiss Madison Sm-1T257 Sublime Ii Compact
- Dual flush with high-performance gravity 1.1 / 1.6 gallon per flush (gpf). Item dimension L: 24 x W: 13.81 x H: 27.31 inches
- Seamless porcelain one-piece with an easy-to-clean design
- Compact bowl ensures plenty of room for comfort in small spaces
- Soft Closing Seat closes gently and quietly
- Quick-Release seat can be unlatched from the toilet for easy removal and convenient cleaning no tools required
Dual Flush Valve Replacement Button
- Genuine replacement buttons for Glacier Bay and other Dual Flush Toilets
- Easy to install
- Fit’s 3” Dual Flush Valve, 2-Piece toilets, including Glacier Bay, AquaSource, Project Source and more
- Chrome finish
- Designed for Tank Lid Mount only
American Standard 7381091-400.0070A Dual Flush Valve,
- For use with American Standard H2 option toilet without an in tank liner
- Reliable performance
- Easy to install
- Country of Origin: Mexico
Htdak 12 Inch (About 30Cm) Toilet
- This toilet flush valve kit is for split toilets with a top button. The button hole is 1.5″ (3.8 cm) in diameter, the tank drain hole is 2.36″ – 2.76″ (6 cm – 7 cm) in diameter, and the height from the bottom of the tank to the ceramic lid is 12.6″ – 15.7″ (32 cm – 40 cm).
- Toilet filling valve can be easily adjusted between 10.24-12.60 inches (26-32 cm), rotate the valve body to adjust the height, snap to ensure that the toilet filling valve will not loosen after completion, the floating cup can be fine-tuned to fit the water level after installation. Please measure before purchase should be in line with the above data, otherwise it does not fit.
- The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses.
- The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality.
- The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly.
The Do’s and Don’ts of Dual Flush Residential Toilet Shopping
Are you looking to buy a new dual flush residential toilet? Whether you’re in the market for dual flush residential toilet, it’s important to make sure you’re getting the best product for your needs. Here is a guide to help you understand what to consider when making your purchase:
Why You Should Choose This Dual Flush Residential Toilet
The most important factor to consider when choosing a dual flush residential toilet is whether or not it fits your needs. Make sure the dual flush residential toilet you’re considering has the features that you need and that it’s a good value.
What to Look For Before Buying
Before buying a dual flush residential toilet, it’s important to do your research. Read reviews and compare different models to make sure you’re getting the best product for your money. Also, make sure you understand the warranty and return policies of the product you’re considering.
Price of Dual Flush Residential Toilet
When considering price, it’s important to look at total cost and not just the initial price. Consider any additional fees, taxes, or shipping costs that might be associated with the product. Also, make sure you understand the return policies of the product you’re considering and any additional costs associated with returning it.
Quality of Dual Flush Residential Toilet
Quality is an important factor when considering a product. Make sure you understand the material used in the product and any warranties or guarantees that come with it. If the product is made up of multiple parts, consider how well those parts will stand up to use and how easy it is to repair or replace them if necessary.
Customer Service
Customer service is also an important factor when considering a product. Make sure you understand the company’s policies regarding returns, exchanges, and repairs. If you’re buying online, make sure the company has an easy-to-use website and a customer service department that can help you with any questions or issues.
These are just a few of the considerations you should keep in mind when choosing a dual flush residential toilet. By taking the time to do your research and make sure you’re getting your desired dual flush residential toilet for your needs, you can make sure you’re making a wise purchase.
The Summary
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader!
After reading this article, we hope you have found your desired dual flush residential toilet.
If you find any featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
