Finding The Perfect Dual Flush Gravity Toilet

Are you looking for the most reliable and efficient dual flush gravity toilet on the market?
Then you are in the right place. We are here to save you time by going through tons of reviews available online. We did not compromise to choose the finest ones and prepared this list for you. We tried to make sure that you get only the best dual flush gravity toilet from our suggestions.
In hurry! Check our lists –

ImageProduct NameAction
Danco HYR451T HyrdroRight Universal Water-Saving ToiletDanco HYR451T HyrdroRight Universal Water-Saving Toilet
Danco HYR460 Hydroright HyrdroRight Universal Water-SavingDanco HYR460 Hydroright HyrdroRight Universal Water-Saving
Swiss Madison SM-1T112 Ivy One PieceSwiss Madison SM-1T112 Ivy One Piece
R&T A2422M 3R&T A2422M 3″ Dual Flush Valve
Dual Flush Valve Replacement ButtonDual Flush Valve Replacement Button

Our Picks for the Best 10 Dual Flush Gravity Toilet

We’ve analyzed countless reviews to make this article for you. If you are looking for the best dual flush gravity toilet then our recommended top products would be an ideal choice.

Danco Hyr451T Hyrdroright Universal Water-Saving Toilet

Danco HYR451T HyrdroRight Universal Water-Saving Toilet image
  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required. This has an adjustable height of 11-13.8 inches.
  • TOILET FLUSH VALVE COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.

Danco Hyr460 Hydroright Hyrdroright Universal Water-Saving

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving image
  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS.
  • FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids
  • DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.

Swiss Madison Sm-1T112 Ivy One Piece

Swiss Madison SM-1T112 Ivy One Piece image
  • Dual Tornado flush with high-performance gravity 0.8 / 1.28 gallon per flush (gpf).
  • Fully skirted design for sleek look and easy cleaning
  • Environment Friendly WaterSense toilets, meet strict EPA flushing guidelines.
  • Elongated & Comfort height bowl offers added room and comfort.
  • Soft Seat to close slowly and quietly.

R&T A2422M 3″ Dual Flush Valve

R&T A2422M 3
  • 【Enhance Your Toilet’s Performance】Fix a leaking toilet with 3″ (80 mm) drain outlet and turn into a powerful flushing. Using together with R&T fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Please note: fill valve, gasket and bolts kit are sold separately.
  • 【Water-Saving】The 3 in. (80 mm) dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill. Lighter pushing force, more convenient for elder and children.
  • 【Easy Installation & Adjustment】Easy installation without tools. Adjustable overflow tube to fit different tank heights(11.22″-15.15″), half and full water level adjusters to control water consumption.
  • 【Modern Top Mount Dual Push Button】Endurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid.
  • 【Warranty】Direct supply from global leading manufacturer,backed by 5 Years Warranty.

Dual Flush Valve Replacement Button

Dual Flush Valve Replacement Button image
  • Genuine replacement buttons for Glacier Bay and other Dual Flush Toilets
  • Easy to install
  • Fit’s 3” Dual Flush Valve, 2-Piece toilets, including Glacier Bay, AquaSource, Project Source and more
  • Chrome finish
  • Designed for Tank Lid Mount only

American Standard 7381091-400.0070A Dual Flush Valve,

American Standard 7381091-400.0070A Dual Flush Valve, image
  • For use with American Standard H2 option toilet without an in tank liner
  • Reliable performance
  • Easy to install
  • Country of Origin: Mexico

T Tulead Toilet Push Flush Valve

T Tulead Toilet Push Flush Valve image
  • 🔷Toilet Type:One-piece toilet
  • 🔷Dual flush water-saving type,can adjust water in the water tank for all drainage
  • 🔷Fit for 64mm/2.5″ drainage hole (Pls check the detailed size)
  • 🔷With silicone washer,good elasticity, high density, sustainable use
  • 🔷Stainless steel hook lock, strong locking force, strong corrosion resistance, and not easy to break

Htdak 12 Inch (About 30Cm) Toilet

HTDAK 12 Inch (About 30cm) Toilet image
  • This toilet flush valve kit is for split toilets with a top button. The button hole is 1.5″ (3.8 cm) in diameter, the tank drain hole is 2.36″ – 2.76″ (6 cm – 7 cm) in diameter, and the height from the bottom of the tank to the ceramic lid is 12.6″ – 15.7″ (32 cm – 40 cm).
  • Toilet filling valve can be easily adjusted between 10.24-12.60 inches (26-32 cm), rotate the valve body to adjust the height, snap to ensure that the toilet filling valve will not loosen after completion, the floating cup can be fine-tuned to fit the water level after installation. Please measure before purchase should be in line with the above data, otherwise it does not fit.
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses.
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality.
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly.

Toilet Flush Valves 2-Inch Replacement Valve

Toilet Flush Valves 2-Inch Replacement Valve image
  • 1.UNIVERSAL DESIGN: Flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet.
  • 2.MEASURE TWO SIZE: This item is only applicable to 2.56″-2.95″(65mm-75mm)(about the size of a baseball) Toilet tank hole Diameter,and it cannot be used if it exceed this size.Measure the Tank Height: Height Should be 10″- 11.8″ (25.4 cm-30 cm). Please measure the size including ceramic cover for water tank, otherwise , it won’t fit.
  • 3.DUAL FLUSH WATER-SAVING TYPE: Dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
  • 4.QUICK AND EASY INSTALLATION: Our toilet drain valve is suitable for most one piece toilets.(not including flapper valve) easy to install in 10 minutes or less, and saves time and effort,get your toilet flushing like new again.
  • 5.TIPS: Please check the size in the second image before buying. Fit For TOTO THU338 flush valve.

Dual Flush Toilet Kit Plastic Adjustable

Dual Flush Toilet Kit Plastic Adjustable image
  • B Easy to install: This product is easy to disassemble and install, and the structure is simple and not easy to damage
  • Material use: The torsion spring is made of high-quality 304 stainless steel wire, durable and full of elasticity
  • Push torsion bar design: Press the torsion bar with a total length of 10CM, which can be rotated, elongated and shortened, and can also be shortened by itself, which is easy to adjust
  • Electroplating technology: Using high-end electroplating technology, multi-layer electroplating process, high brightness and ultra-smooth surface, long-lasting
  • Note: Please check the size of your toilet lid hole before buying, our toilet button can be compatible with most double flush toilets with 38mm hole in the tank cover

Expert Tips for Finding the Perfect Dual Flush Gravity Toilet

Are you looking to buy a new dual flush gravity toilet? Whether you’re in the market for dual flush gravity toilet, it’s important to make sure you’re getting the best product for your needs. Here is a guide to help you understand what to consider when making your purchase:

Why You Should Choose This Dual Flush Gravity Toilet

The most important factor to consider when choosing a dual flush gravity toilet is whether or not it fits your needs. Make sure the dual flush gravity toilet you’re considering has the features that you need and that it’s a good value.

What to Look For Before Buying

Before buying a dual flush gravity toilet, it’s important to do your research. Read reviews and compare different models to make sure you’re getting the best product for your money. Also, make sure you understand the warranty and return policies of the product you’re considering.

Price of Dual Flush Gravity Toilet

When considering price, it’s important to look at total cost and not just the initial price. Consider any additional fees, taxes, or shipping costs that might be associated with the product. Also, make sure you understand the return policies of the product you’re considering and any additional costs associated with returning it.

Quality of Dual Flush Gravity Toilet

Quality is an important factor when considering a product. Make sure you understand the material used in the product and any warranties or guarantees that come with it. If the product is made up of multiple parts, consider how well those parts will stand up to use and how easy it is to repair or replace them if necessary.

Customer Service

Customer service is also an important factor when considering a product. Make sure you understand the company’s policies regarding returns, exchanges, and repairs. If you’re buying online, make sure the company has an easy-to-use website and a customer service department that can help you with any questions or issues.

These are just a few of the considerations you should keep in mind when choosing a dual flush gravity toilet. By taking the time to do your research and make sure you’re getting your desired dual flush gravity toilet for your needs, you can make sure you’re making a wise purchase.

Last Thoughts

It is clear that finding the right product for your needs can be a challenging task. It is important to do thorough research, consider a variety of factors, and read reviews from other customers in order to make an informed decision.

Thank you for reading our blog post, and we hope it has been helpful in your shopping journey.