Do you know where the Best 3d Printer Spool Holder is to be found? Many options are available on the market. So, it is difficult to choose the right one. No worries, You can trust our selection. Because, we have worked hard studying and analyzing 37183 reviews for 3d Printer Spool Holder and rating them. It was a difficult job to list only ten products where thousands of them are available online. By reading this article, you’ll be able to choose your ideal one much faster. I hope it will help you to make the final decision for Best 3d Printer Spool Holder.
Comparison Chart for Best 3d Printer Spool Holder
The market is filled with many 3d printer spool holder. You might find yourself struggling to choose the best one. Our team were considered 37183 reviews when writing our recommendations for the Best 3d Printer Spool Holder in this article.
Comparison Chart of Top 10 3d printer spool holder
|1||3D Printer Filament Spool Holder - Stable - Adjustable (Black)||9.8||Check Price On Amazon|
|2||Creality Original Upgrade Rotatable Filament Holder Mount Spool Bracket for Ender 3 V2 Ender3 Pro/Max||9.4||Check Price On Amazon|
|3||Befenybay 3D Printer Filament Holder for Universal Adjustable Filament Mount Rack Bracket for PLA/ABS/Nylon/Wood/TPU/Other 3D Printing Material||9.2||Check Price On Amazon|
|4||Black Bearing Design 3D Printer Filament Spool Holder Fits All Spools of Any Size and All Filament Types for Pla/abs/TPU/Other 3D Printing Materials (2 Set)||9.2||Check Price On Amazon|
|5||Zeberoxyz 3D Printer Filament Holder Rotate Spool with Base Filament Mount Rack Bracket Used for TPU/PLA/ABS/Nylon/Wood 3D Printing Material--Not Included Filament (Rotate Spool with Base)||9||Check Price On Amazon|
|6||Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder||9||Check Price On Amazon|
|7||Iverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLA||8.8||Check Price On Amazon|
|8||Creality Multi-Kilogram Spool Holder Filament Spool Metal Holder for Ender3 V2/Ender3 Pro/CR-30 Creality 3D Printer||8.8||Check Price On Amazon|
|9||Bilway 3D Printer Filament Rack Spool Bracket Holder Upgrade with Bearing Rotatable for Creality Ender 3||8.2||Check Price On Amazon|
|10||Upgraded Dryer Box of 3D Printer Filament||8.2||Check Price On Amazon|
1. 3D Printer Filament Spool Holder - Stable - Adjustable (Black)
- HIGH QUALITY: We use only the best bearings which creates a consistent free flowing spool that reduces all drag on your 3D printer filament.
- ADAPTABLE: Fits all spools of any size and all filament types.
- STURDY & STABLE: Will not tip over and can handle the weight of larger spools.
- DURABLE: Very difficult to break these, they can be dropped without worry of breaking
- 3D PRINTED: High quality 3d print.
2. Creality Original Upgrade Rotatable Filament Holder Mount Spool Bracket for Ender 3 V2 Ender3 Pro/Max
- The Spool holder can rotate 90C in a single track, making the filament better fit on your table.
- This Spool holder kit is 100% original from creality and made of high strength ABS and PC material.
- Compatible with Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 3S, CR-10 MAX, CR-6 SE, CR-6 MAX and ANYCUBIC Vyper 3D Printer ,and Suit for 1Kg 1.
- Package: 1sets rotatable holder
3. Befenybay 3D Printer Filament Holder for Universal Adjustable Filament Mount Rack Bracket for PLA/ABS/Nylon/Wood/TPU/Other 3D Printing Material
- Material】 Metal and Plastic, stable, durable
- Application】Suit for 0.5KG 1KG PLA ABS 1.75mm 3.0mm 3d printer filament
- Widely Used】Suit for all 3D printers
- Install】Already assembled,you don’t need to assemble it by yourself
- Package Include】1kit 3D Printer Filament Holder, 1pcs Allen Key
4. Black Bearing Design 3D Printer Filament Spool Holder Fits All Spools of Any Size and All Filament Types for Pla/abs/TPU/Other 3D Printing Materials (2 Set)
- What’s contained: you will get 2 set black 3D printer spool holders, 4 pieces separated holders, compatible with PLA/ABS/TPU/Other 3D printing materials.
- Smooth bearings design: filament spool holder adopt the latest technology, the silicone anti-slip mats has better adhesion than before and the holders are not easy to slip; The filament spool holder bearings are covered with a ring to prevent the bearings from becoming stuck due to oxidation, and the bearing runs smoothly, reduces all drag on your 3D printer filament.
- Easy to use: the filament roller is a pre-assembled holder, no tools needed, easy installation and quick installation, the bearings may be a bit stiff when you first use, please lubricate a little more and they will run well.
- Strong and durable: the 3D printing spool holder made of quality metal and plastic, stable and durable, the size is approx.
- Wide applicable: adopting quality material which creates a consistent free flowing spool that reduces all drag on your 3D printer filament, the separated holder fits all spools of any size and all filament types, the most common works well with 1 kg and 1.
5. Zeberoxyz 3D Printer Filament Holder Rotate Spool with Base Filament Mount Rack Bracket Used for TPU/PLA/ABS/Nylon/Wood 3D Printing Material–Not Included Filament (Rotate Spool with Base)
- 3D Printer Filament Spool Holder Material:High Quality Aluminum alloy; Surface Treatment: anodizing,long service life,fine workmanship.
- Install:Easy and quick installation, Use 2pcs M4 screws to fix, stable and not loose
- Filament Holder Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3.0mm 3D printer filament
- Application Scope: Suit for 2020 aluminum frame type 3D printer, Ender 3 series, CR-10 series
- Package Content: 1 Kit 3D printer Rotate Spool filament holder with base, 2pcs M4 T Nuts, 2pcs M4x10mm screws, 2pcs M3x12mm screws, 2pcs Allen key.
- Features:The filament disk rotates concentrically to make feeding filament more smoothly
- The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.
6. Sovol Filament Dryer
- Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure.
- Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time.
- Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt.
- Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm.
- Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly.
7. Iverntech 1 Spool Acrylic 3D Printer Filament Holder Mount Rack for PLA
- Iverntech 3d printer filament holder
- Widely used for most pla, abs, wood, tpu, nylon, flexible filaments
- Much firmly design, won’t fall down with all kinds of filaments
- The sticker paper can be peeled off before assemble it
- Filament pictured is for display purpose only, not included
8. Creality Multi-Kilogram Spool Holder Filament Spool Metal Holder for Ender3 V2/Ender3 Pro/CR-30 Creality 3D Printer
- Application]: 8.
- durability and stability]: The overall frame of the 3d printer filament bracket is composed of sheet metal and is integrally cast to ensure the long-term durability and stability of the filament holder.
- Easy to Use]:Simplified appearance makes it convenient and easy to install and disassembly.
- Special Design]:Add card position design, not easy to slide off.
- Anti-slip Silicone Base]:The silicone base spacer prevents sliding, and the base is designed to be bent to adapt to uneven ground.
9. Bilway 3D Printer Filament Rack Spool Bracket Holder Upgrade with Bearing Rotatable for Creality Ender 3
- Material】 Metal and Plastic, stable, durable.
- Easy Assembled】Easy installation and quick installation.
- Rotatable 3D Printer Filament Holder】3D Printer Filament Holder is Rotatable, do not entangle the filament.
- Compatibility】Suit for Ender-3 series, CR-10 series, Artillery Sidewinder X1, fits in most 3d printers.
- Package Include】1pcs 3D Printer Filament Bracket, 2pcs M4 T-Nut, 2pcs M4x8mm screws.
10. Upgraded Dryer Box of 3D Printer Filament
- Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift.
- Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors.
- Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time.
- Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm.
- User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing.
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best 3d Printer Spool Holder currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top 3d Printer Spool Holder based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the 3d Printer Spool Holder before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the 3d Printer Spool Holder they used.
- Seller Rank: Now, this is interesting! You don’t just need a good 3d Printer Spool Holder, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your 3d Printer Spool Holder before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable 3d Printer Spool Holder will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good 3d Printer Spool Holder if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated 3d Printer Spool Holder on the market, the products that got mostly negative ratings get filtered and discarded.